Price: [price_with_discount]
(as of [price_update_date] – Details)
Product Description
Step 1:
Remove the sim card tray.
Use a hair dryer to heat evenly along the edge of the back cover of the phone, about 2-3 minutes
Notice Do not stay in one position for too long to prevent overheating
Step 2:
Try to pull and open a gap between back cover and frame after heat. Insert into a guitar pick or card to cut the sticker.
Notice If the back cover is seriously damaged, you can paste some tape and then use the suction cup
Step 3:
Gently open the back cover.
Remove adhesive residue from the edges of the phone, and remove broken glass that has fallen into the phone from the back cover
Notice if the back cover is made of glass, be careful from cut your fingers with broken glass
Step 4:
Tear off the new back cover adhesive protective film, gently align the mobile phone and stick the back cover, and after fixing the position, gently press the fixing adhesive along the surrounding area.
Notice Do not stain the rear lens glass of the back cover
Step 5:
Hold the phone tightly with a rubber band for 3 hours to allow the adhesive on the back cover to fit well.
Notice when adhesive is not strong enough, apply a small amount of B7000 glue on the adhesive
Color: Green
Material : Acrylic Glass
Please check the installation instruction by rolling to lower part of this page.
This is a Back Panel Cover Replacement Kit, help to replace the damaged original back cover come with all the toolkit and adhesive.
[ad_2]